High Speed Handpiece Wood Carving Scrimshaw Ivory Carve Bone or Eggs 800-373-0707
Untitled1

 

The Highest Quality High Speed Carving Burs Made!

Be sure to check out our full line of bur kits. Thes include a free dental-type bur case.


We sell only the top quality Carbide, Diamond, Stone, and Rubber Burs.
Burs are an important aspect of any rotary tool. The bur you use will make the job easier, faster, and better. It is very important that you buy only the top quality burs. Our burs are made for dental professionals. They have been through stringent testing and will provide a vibration-free cutting. The shank is made of high tensile stainless steel precision made for perfect concentricity with ideal surface finish. Diamond bur particles are bonded by means of electroplating with uniform size and exceptionally sharp-edged diamonds. Be wary of bargain diamond burs which may not be straight or made to high quality standards.

We offer a great selection of top quality burs to make your Turbo Carver efficiently carve, engrave, or etch just the way you intend. Pictures of each bur as well as descriptive information are shown below to help you choose the best bur for your job. All burs are 16mm 1/16 size. Be sure to look over our Bur Sets at the bottom of this page.

Click Here to See Bur Kits at the bottom of this page.

Enter the number of items, then scroll down and click the ADD TO SHOPPING CART button
All of these Friction Grip Dental Burs are 1/16 inch shaft size.
Note: Larger image shows the shape of the bur. The smaller view below is more to scale.

Carbide Burs

PICTURE

ITEM

DESCRIPTION

PRICE

QTY

CARBIDE - Small Round Bur

1

CARBIDE - Small Round
For shaping and texturing in wood, and engraving metal. Also good for bulk reduction in most materials.
.043 inch (1.10 mm) tip

$3.05

 

CARBIDE - Medium Round Bur

4

CARBIDE - Medium Round
For shaping and texturing in wood, and engraving metal. Also good for bulk reduction in most materials.
.055 inch (1.40 mm)tip

$3.05

 

CARBIDE - Medium Round Long Bur

004

CARBIDE - Medium Round - Surgical Length
For shaping and texturing in wood, and engraving metal. Also good for bulk reduction in most materials. 1/4" longer shaft than #4
.055 inch (1.40 mm)tip

$3.55

 

CARBIDE - Large Round Bur

8

CARBIDE - Large Round
For shaping and texturing in wood, and engraving metal. Also good for bulk reduction in most materials.
.083 inch (2.11 mm) tip

$3.05

 

CARBIDE - Fissure, Cross Cut Small Bur

56

CARBIDE - Fissure, Small
Great for outlining relief carvings. 4.2 mm (.165 in.) head length.
.035 inch (0.90 mm) tip

$3.05

 

CARBIDE - Fissure, Cross Cut Small Long Bur

556

CARBIDE - Fissure, Cross Cut Small
Great for outlining relief carvings. 4.2 mm head length.
.036 inch (0.92 mm) tip

$3.45

 

CARBIDE - Fissure, Large Bur

59

CARBIDE - Fissure, Large
Great for doing inlay and bulk reduction work. 4.4 mm head length.
.052 inch (1.32 mm) tip

$3.05

 

CARBIDE - Fissure, Cross Cut Tapered Bur

699

CARBIDE - Fissure, Cross Cut Tapered
Good bur for outlining relief carvings in wood. Also good bur for metal engraving. 4.2 mm head length.
.022 inch (0.58 mm) tip

$3.05

 

CARBIDE - Fissure, Cross Cut Tapered Long Bur

699L

CARBIDE - Fissure, Cross Cut Tapered - Long
Good bur for outlining relief carvings in wood. Also good bur for metal engraving. 5.2 mm head length.
.022 inch (0.58 mm) tip


$3.30

 

CARBIDE - Sharp Taper 1701 CARBIDE - Fissure, Cross Cut Tapered
Good bur for outlining relief carvings in wood. Also good bur for metal engraving and signing knives.
.019 inch (0.44 mm) tip

$3.30

CARBIDE - Fissure, Tapered Long Bur

170L

CARBIDE - Fissure, Tapered - Long
Used for high definition engraving in metal, and for outlining relief and inlays where there are no fine details. Easy to use in metal. Good for medium detailing. 5.2 mm head length
.
.023 inch (0.60 mm) tip- .247 length head


$3.50

 

CARBIDE - Small Inverted Cone

33 1/2

CARBIDE - Small Inverted Cone
Ideal for bright line engraving in metal and undercutting for epoxy inlay.
.022 inch (0.58 mm) tip

$3.05

 

35

CARBIDE - Medium Inverted Cone
Ideal for bright line engraving in metal and undercutting for epoxy inlay.
.034 inch (0.88 mm) tip

$3.05

 

CARBIDE - Large Inverted Cone

37

CARBIDE - Large Inverted Cone
Ideal for bright line engraving in metal and undercutting for epoxy inlay.
.069 inch (1.76 mm) tip

$3.05

 


Carbide Specialty Burs

PICTURE

ITEM

DESCRIPTION

PRICE

QTY

CARBIDE - Long Dome Pear

332L

CARBIDE - Long Dome Pear
Good for cutting eggs and general contouring and carving. 5.11 mm head length
.046 inch (1.18 mm) tip

$3.50

 

7408
CARBIDE - Football, Large, For Trimming & Finishing Bur - Great for texturing, contouring, and shaping wood, egg shell, or gourds. Can even be used for finer details.
$9.15


7406
CARBIDE - Football, Medium, For Trimming & Finishing Bur - Great for texturing, contouring, and shaping wood, egg shell, or gourds. Can even be used for finer details.
$9.15

7404 CARBIDE - Football, Medium, For Trimming & Finishing Bur - Great for texturing, contouring, and shaping wood, egg shell, or gourds. Can even be used for finer details.

 

$9.15

 


701-L
CARBIDE - Agressive Cross Cut Tapered Fissure,
Good bur for bulk reduction in
wood, shell, and gourd. Great for etching and engraving in harder materials.

 

$7.90

 

 


162
Lindemann Stainless Steel - Bone Cutter, Cross Cut Tapered Fissure,
Good bur for bulk reduction in wood or any other soft material. Best bur for cutting out sections of Ostrich and Emu eggs.
.039 inch (1.00 mm) tip- 8.60mm length head

 

$22.15

CARBIDE - Sharp Taper

7611

CARBIDE - Sharp Taper
Used for fine detailing in softer materials or outlining a delicate relief carving. This tip is very delicate and easily broken.
.008 inch (0.23 mm) tip

$6.75

 

CARBIDE - Needle Point

9903

CARBIDE - Needle Point
For ultra-fine detailing and scrimshaw. Great for detail in smooth metal, glass, or softer materials. Also good for signing ones name.
The thickness of a human hair is 0.001
.003 inch tip (0.07 mm) tip

$9.60

 


Diamond Burs

PICTURE

ITEM

DESCRIPTION

PRICE

QTY

DIAMOND - Small Round, Course

MM1

DIAMOND - Small Round, coarse
Best bur for engraving and stippling in glass. Also used to shape and contour softer materials and manually finish carvings using a pin vise.
.042 inch tip
(1.07 mm) tip

$6.65

 

DIAMOND - Medium Round, Course

MM3

DIAMOND - Medium Round, coarse
Best bur for engraving and stippling in glass. Also used to shape and contour softer materials and manually finish carvings using a pin vise.
.056 inch tip
(1.43 mm) tip

$6.65

 

DIAMOND - Large Round, Super Course

MM3.2

DIAMOND - Large Round, Super coarse
Best bur for engraving and stippling in glass. Also used to shape and contour softer materials and manually finish carvings using a pin vise.
.096 inch tip
(2.46 mm) tip

$6.65

 

DIAMOND - Small Football, Fine

MM4F

DIAMOND - Small Football, Fine
Used for contouring and fine shaping in softer materials like wood or egg shell. Also used to carve hard materials like glass and stone and for producing sandblasting and other effects.
.028 inch tip
(0.72 mm) tip

$6.65

 

DIAMOND - Small Football, Super Course

MM4

DIAMOND - Small Football, Super coarse
Used for contouring and fine shaping in softer materials like wood or egg shell. Also used to carve hard materials like glass and stone and for producing sandblasting and other effects
.
.028 inch tip (0.72 mm) tip

$6.65

 

DIAMOND - Large Football, Fine

MM5F

DIAMOND - Large Football, Fine
Used for contouring and fine shaping in softer materials like wood through egg shell. Also used to carve hard materials like glass and stone and for producing sandblasting and other effects.
.030 inch tip
(0.77 mm) tip

$6.65

 

DIAMOND - Large Football, Super Course

MM5C

DIAMOND - Large Football, Super coarse
Used for contouring and fine shaping in softer materials like wood through egg shell. Also used to carve hard materials like glass and stone and for producing sandblasting and other effects
.
.030 inch tip (0.77 mm) tip

$6.65

 

MM21 DIAMOND - SMALL Football, with flaired center. Used for contouring and fine shaping in wood or egg shell. Also used to carve hard materials like glass and stone and for producing sandblasting and other effects.

 

$9.15

MM27

DIAMOND - Medium Football, with flaired center.. A bit larger than the MM5.

$9.15

 

MM31

DIAMOND - Large Football, with flaired center. A bit larger than the MM5.

$6.65

MM230

DIAMOND - LARGE Football, Sharp Edge. Similar to an mm5 but with sharper edge around center. Good for bulk reduction.

$6.65

 


Diamond Specialty Burs

PICTURE

ITEM

DESCRIPTION

PRICE

QTY

DIAMOND - Smooth (no flutes) Ultra Fine

 

SP1

DIAMOND - Smooth (no flutes)
Ultra Fine
Single point solid diamond bur. Ideally suited for ultra fine and controllable fine-line engraving in hard materials. Perfect for etching tiny lines in metal. The sharp point will last for many hours of engraving, this bur is well worth the price if you need to make fine lines.
This is the only bur with such a fine point available. Made with exacting specifications specially for Turbo Carver not available elsewhere.
The thickness of a human hair is 0.001
.002 inch (0.06 mm) tip

$27.15

 

MM312 DIAMOND - Small Inverted Cone
Ideal for bright line engraving in metal & shaping all materials
.020 inch (0.55 mm) tip
$6.65

MM320
DIAMOND - Large Inverted Cone
Ideal for bright line engraving in metal & shaping all materials
.040 inch (1.8 mm) tip
$6.65

DIAMOND - Flame Point, Fine

MM58F

DIAMOND - Flame Point, Fine
Used for contouring and fine shaping in softer materials like wood through egg shell. Also used to carve hard materials like glass and stone. Makes a fine line in hard or soft materials.
.030 inch tip
(0.77 mm)

$7.15

 

DIAMOND - Flame Point, Fine - Long

MM58L

DIAMOND - Flame Point, Fine - Long
Used for contouring and fine shaping in softer materials like wood through egg shell. Also used to carve hard materials like glass and stone. Makes a fine line in hard or soft materials. 1/4" longer than MM58F

$7.15

 

DIAMOND - Flame Point, Course

MM58C

DIAMOND - Flame Point, coarse
Used for contouring and fine shaping in softer materials like wood through egg shell. Also used to carve hard materials like glass and stone. Makes a fine line in hard or soft materials.
.030 inch tip
(0.77 mm)

$6.65

 

DIAMOND - Knife Edge

023

DIAMOND - Small Knife Edge Wheel
Used to carve straight grooved channels
.084 inch diameter
.011 inch thick

$12.15

 

863
DIAMOND - Wheel- large
Used to carve straight, flat bottom grooves and for sectioning.
3/16 inch in diameter (.17 mm)
.046 inch thick (1.3 mm)

 

$6.65

860
DIAMOND - Wheel- Smaller
Used to carve straight, flat bottom grooves and for sectioning.
diameter (.11 mm)
.043 inch thick (1.2 mm)

 

$6.65


Stone Burs

PICTURE

ITEM

DESCRIPTION

PRICE

QTY

GREEN STONE - Round

601-120

GREEN STONE - Round
Used as a pre-polish for glass and ceramics. Can be used in place of diamonds for engraving and bulk reduction. Also good for grinding metals.
.0117 inch tip
(2.98 mm) diameter tip

$3.45

 

WHITE ARKANSAS - Round

601-420

WHITE ARKANSAS - Round
Provides a fine polish in glass, ceramics and hard metals.
.0117 inch tip
(2.98 mm) diameter tip

$3.90

 

GREEN STONE - Flame

661-120

GREEN STONE - Flame
Used as a pre-polish for glass and ceramics. Can be used in place of diamonds for engraving and bulk reduction. Also good for grinding metals.
.030 inch tip
(0.77 mm) tip

$3.05

 

WHITE ARKANSAS - Flame

661-420

WHITE ARKANSAS - Flame
Provides a fine polish in glass, ceramics and hard metals.
.030 inch tip
(0.77 mm) tip

$4.15

 

Rubber Polishing Burs

PICTURE

ITEM

DESCRIPTION

PRICE

QTY

RUBBER POLISHING - Brown pre-polish

0053

Formally Called 0053.3
RUBBER POLISHING - Brown pre-polish
These burs have a grit impregnated into a rubber base. They produce a fine finish in metals. These burs must be run at a reduced speed or they will disintegrate.

$3.05

 

RUBBER POLISHING - Green final polish

0153.3

Formally Called 0053.3
RUBBER POLISHING - Green final polish
These burs have a grit impregnated into a rubber base. They produce a fine finish in metals. These burs must be run at a reduced speed or they will disintegrate.

$3.05

 

BC400
BUR Caddy - Handy holder to organize and keep track of your burs.
Holds 25 burs.
$9.98

~Bur Sets ~

ITEM

DESCRIPTION

PRICE

QTY

Basic Starter Bur Set
This set contains many useful burs found in most kits. It is a great starter set to have and offers more possibilities to your carving.
This set also include a high quality dental bur cassette carrier to keep the burs safely organized.

$84.98

BurSetEggs

Burs for Egg Shell Carving
Complete set of burs for EGGS.
See more on the Accessories Page.
This set also include a high quality dental bur cassette carrier to keep the burs safely organized.


$136.98




BurSetWood

Burs for Wood Carving
Complete set of 23 burs for WOOD
See more on the Accessories Page.
This set also include a high quality dental bur cassette carrier to keep the burs safely organized.


$122.98

 

Complete set of 19 burs for GLASS This set also include a high quality dental bur cassette carrier to keep the burs safely organized.
See more on the Accessories Page.


$107.98
Complete set of burs for GOURDS
with cassette case

See more on the Accessories Page.
$123.98
Complete set of burs for METAL
with cassette case
$134.98
Complete set of burs for BONE & ANTLER
This set also include a high quality dental bur cassette carrier to keep the burs safely organized.
$159.98
Complete set of 20 burs for STONE
with cassette case
$131.98

Back to top


Secure Server 
Secure Server Purchase Options Secure Server
You will be transferred to our Secure Server prior to entering personal information.
Enter a quantity for each item that you wish to purchase, then select the
"Add To Shopping Cart" button at the bottom of the page.

Bur Recommendations Below:

 

Burs for Glass:
Carbide:
1,
4,
8,
699L,
1701,
7611,
33.5,
37,
9903,
701-L
Diamond:
MM1,
MM3,
MM3.2,
MM4,
MM5F,
MM58C,
023,
863 Wheel,
Stone:
Green Flame - 661-120,

19 total
The 699, & MM5C are usually included in systems, so these most useful burs are not included on list.

Burs Especially for Metal
1,
4,
8,
699L,
1701,
7611,
33 1/2,
37,
9903,
701-L
MM1,
MM3,
MM3.2,
MM4,
MM5F,
MM58C,
023,
661-120 Green Stone,
SP1
20 total
The 699, & MM5C are usually included in systems, so these most useful burs are not included on list.

Burs recommended for Stone
1,
4,
8,
1701,
7611,
SP1
33.5,
37,
9903,
701-L
MM1,
MM3,
MM3.2,
MM4,
MM5F,
MM58C,
661-120


18 total
The 699, & MM5C are usually included in systems, so these most useful burs are not included on list.

EGG Bur Kit
Carbide:
1,
4,
8,
699L,
7611,
33.5,
37,
162 Bone Cutter,
7406,
701-L
Diamond:
MM1,
MM3,
MM3.2,
MM4,
MM5F,
MM58C,
MM58F,
023,
863,
Stone:
Green Flame - 661-120,
White Arkansas Flame - 661-420,
21 total
The 699, & MM5C are usually included in systems, so these most useful burs are not included on list.

Burs recommended for Scrimshaw, bone, & Antler
1,
4,
8,
699L,
56,
1701,
7611,
9903,
331/2,
37,
701-L
MM1,
MM3
MM3.2,
MM4,
MM5F,
023,
863
661-120 Green Stone,
162-Bone Cutter,
SP1,
21 total
The 699, & MM5C are usually included in systems, so these most useful burs are not included on list.

Starter Bur Kit
1,
4,
8,
33.5,
37,
7611,
701,
023,
863,

MM1,
MM3.2,
MM4,
MM5F,
MM58C,
661-120

15 total
The 699, & MM5C are included in systems,
This set contains many useful burs found in most kits. It is a great set to have and offers more possibilities to your carving.

Gourd Bur kit
Carbide:

1,
4,
8,
556,
59,
699L,
1701,
9903,
7611,
33.5,
37,
332L,
170L,
701-L,
7406,
Diamond:
MM1,
MM3.2,
MM4,
MM5F,
023,
863,
MM58C
Stone
Green Flame 661-120,
23 total
The 699, & MM5C are usually included in systems, so these most useful burs are not included on list.